Ceiling Fan Blade Covers
Fan blade covers – Sometimes a fan blade does not need to be replaced – it may just be out of position. Check the alignment by comparing the distance from the ceiling to the top of every page on the fan. If a blade is closer to the ceiling than other blades, may bend downward. These blades can be easily moved. Adjust the screws will tighten the connection between the blade and the fan, which reduces somewhat shaky. Plastic fan blades can literally be bent by hand into better alignment. Also check the blades for even distribution. Stand under the fan, now off, and observing the blades with the fan off. If any of the leaves are not evenly distributed, making adjustments to the bracket with a screwdriver.
Replacing ceiling fan blade covers requires a few simple tools, such as a ladder and screwdriver. Any fan blade covers should be removed before removing the fan blades. Some ceiling fans have weights on them to keep everything in place.
12 Photos Gallery of: Ceiling Fan Blade Covers
Place each fan blade. Insert screws in each fan blade fitting holes. Secure the entire event with a screwdriver. If you have the fan blade covers, put them over the sheets. Place the weights back on the fan blades if necessary. Activating the fan for testing the balance between the sheets. Note that the fan so that it does not wobble when turned on.