Making Wood Ceiling Tiles
Wood ceiling tiles – Ceiling is a way to cover the old, ugly roof. Installation is simple enough to be a do it yourself can easily finish the task in a short time. The limitation of this type of roof is that each roof looks pretty much like any other dropped ceilings. New products are now available to use wooden main runners. And cross tees instead of the traditional metal them. These create a wood ceiling tile. You can finish the project with traditional shingles or selecting wood tiles are available in a variety of profiles.
When you make wood ceiling tiles, measure and mark a line around the upper perimeter of the room that is at least 4 inches below the rafters, using a laser or carpenter’s level. Solid wood perimeter molding selected for the project so that the bottom of the profile rests above the line you drew. Use nails long enough to penetrate the studs at least 1 inch. Place the nails not more than 24 inches apart.
12 Photos Gallery of: Making Wood Ceiling Tiles
Draw a scale rendering of the room where you are hanging wood ceiling tiles. Plan location of the timber main runners so as to be 25 inches on center from each other as they run perpendicular to the beams. To figure this, measure the width of the room in inches and divide by 25. This shows the full number of panels you can place. Divide leftover 2 because you want smaller roof panels to go on either side of the room to give the roof a balanced look.More reader came from this term: basement ceilings with wood, wood ceiling tiles