Decorative Ceiling Beams Room Family
Decorative ceiling beams – The character of an exposed beam ceiling gives dimension and classic architectural details to a room. If your family room has exposed beams, box girders can construct. And then decorate them with strips of crown or decorative wood molding. Decorative beams can make a room feel bigger when they formed in lines perpendicular to the room’s entry. And they can make a room feel longer when girders running parallel to the room’s entry way.
Decorative ceiling beams, measure the width and length of your family room ceiling with a tape. Determine how much space you want between each beam. Add this measurement to the width of your rays, resulting in an overall measurement of the space plus the beam. And then divide the width of the roof space by this number. This figure will give you many rays as you can fit in the space.
12 Photos Gallery of: Decorative Ceiling Beams Room Family
Decorative ceiling beams use a stud finder to locate the positions of the beams, and mark the position of each beam in the ceiling. Wear these measured points on both side walls at each end. Transfer the roof’s length measurement to the 2 by 4-inch wood studs. Each wooden stud will be a basis for the decorative beam as they will be screwed to the rafters through the finished ceiling. Cut two 1 by 6-inch wooden boards that the length of the roof measurements. Standing boards on their sides. And also mount a bit 1 of 4-inch wooden board between the ends of these two pieces of wood, at right angles to them.